{"product_id":"rail-hinge-for-track-saw-and-mft-style-workbench","title":"Rail Hinge for track saw and MFT-style workbench","description":"\u003cp\u003eI like my homemade MFT, but I am tired of the parf benchdogs clips.\u003c\/p\u003e\u003cp\u003eI liked Tamar's design for the 3d printed tracksaw hinge (linked below), but it is expensive (plus one needs to add international shipping).\u003c\/p\u003e\u003cp\u003eI decided to give it a try.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMy design is mostly based on Peter Millard's design (linked below) with a single hinge (similar to Tamar's). It means that the height of the back holder auto-adjusts to the thickness of the material.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMy design relies fundamentally on the hinge created by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@Kodiak_1241215\"\u003eMichiel Vandepoel\u003c\/a\u003e:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/616849-fusion360-scalable-parametric-hinge\"\u003ehttps:\/\/www.printables.com\/model\/616849-fusion360-scalable-parametric-hinge\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eand thus I am making the Fusion360 files available as well (see \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/1040954-rail-hinge-for-tracksaw-and-mft-style-tableworkben\"\u003ehttps:\/\/www.printables.com\/model\/1040954-rail-hinge-for-tracksaw-and-mft-style-tableworkben\u003c\/a\u003e)\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eTamar is right. The clearances for a printing-in-place hinge that has no significant play are very tight. Thus you need a well calibrated printer (or modify the parameters in the Fusion360 file). I have included test prints of the hinge and the sliding mechanism of the holder for you to evaluate whether your printer can do it. I have printed everything at a 0.2m layer height with a Bambu lab X1C\u003c\/p\u003e\u003cp\u003eThe clearances for the hinge are 0.2m. The clearances for the sliding holders is 0.1 (it can probably be 0 in my printer).\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eI used PLA (around ½ kg)\u003c\/li\u003e\n\u003cli\u003e4 M5 25 bolts, nuts and washers\u003c\/li\u003e\n\u003cli\u003e2 M5 20 bolts, nuts and washers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eHow to print\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eI recommend you watch Peter Millard's video first. It will give you an idea of operation of the tracksaw hinge and how the different pieces fit together. The main difference between this hinge and his is the hinge mechanism.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eStart by printing the hinge test. You will need some force to get the hinge to “open” (i used a mallot and a vise). But once done, it should move freely. Don't print the hinge until you are happy with the tolerance.\u003c\/li\u003e\n\u003cli\u003ePrint the hinge.\u003c\/li\u003e\n\u003cli\u003ePrint the test-sleeve for the hinge. The hinge should slide freely inside. Furthermore, the tightness of the fit can be adjusted by tightening the screws. Test it.\u003c\/li\u003e\n\u003cli\u003ePrint the rest of the pieces\u003c\/li\u003e\n\u003cli\u003eThe front nipple might be too tight. Sand\/file it. It should be exact.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eHow to assemble\u003c\/h3\u003e\u003cp\u003eI am going to use the names of the plates to reference the parts. Please refer to them.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003col\u003e\n\u003cli\u003eStart with plate 4. The is the part that attaches to your table farther from you (back track holder)\u003c\/li\u003e\n\u003cli\u003ePlate 7. This is the part that connect to the plate 4 part (using bolts). Both create a pocket where the hinge slides into\u003c\/li\u003e\n\u003cli\u003ePlate 5. This is the part that attaches to your table closest to you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000726457\/design\/2025-02-19_dad9ba42c2c3f.png\"\u003e\u003c\/figure\u003e\u003cp\u003ePlate 8. This is the front holder for the hinge. Use a bolt to attach it to the plate 5 part (see above)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e5. Print plates 2 and 6 (the hinge and the bar to attach to the tracksaw). Connect them using bolts as below. The track adapter is shorter in the design that the one showed below (both are ok). It should attach without play.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000726457\/design\/2025-02-19_b33685963a569.png\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e Slide into the track and tighten the bolts. The hinge should have no play at all.\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eSliding fit\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThe lid of the sleeve can be tighten as much as you need it. The idea is that the hinge will slide freely without much play. It is very satisfying to see the mechanism auto-adjust to the height of the material to cut (a shoutout to Peter Millard for this idea).\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eEverything was printed at 25% honeycomb infill, except for the tracksaw connector\/adapter. (which I printed it with 100% infill).\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eRemixing\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThe holders (front and back) have 5mm holes. The idea is that you can attach it to the table exactly where you want it using bolts. Otherwise use the slots and T-tracks.\u003c\/p\u003e\u003cp\u003eIf you remix the actual hinge, please make sure that it gives credit to \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@Kodiak_1241215\"\u003eMichiel Vandepoel\u003c\/a\u003e who is the original designer of the hinge mechanism.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePotential improvements\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThe hinge can only rotate 90 degrees from the table plane, thus, it is a bit unstable (depending on how much track you have behind it). A 115 degrees hinge would be ideal. You can address this problem in one of three ways:\u003cul\u003e\n\u003cli\u003ea) use a strong magnet (as a did) to keep the bolt of the tracksaw connector bound to the top of the sleeve (glue it).\u003c\/li\u003e\n\u003cli\u003eb) use a counter-weight and attach it to the hole of the tracksaw. Properly done, this will allow you to easily move the track into\/out of position.\u003c\/li\u003e\n\u003cli\u003ec) modify the hinge (use Fusion360).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eFinal notes\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003ePlease, if you build it and\/or have ideas for improvement, share them. Though this is a potential once-in-a-blue-moon print, it would be interesting to see how we can all improve the usability of the tracksaw.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eAcknowledgments\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eWe build on the shoulders of giants:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eI am very grateful to \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@Kodiak_1241215\"\u003eMichiel Vandepoel\u003c\/a\u003e for publishing his great hinge design and for making the fusion360 file available (\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/616849-fusion360-scalable-parametric-hinge\"\u003ehttps:\/\/www.printables.com\/model\/616849-fusion360-scalable-parametric-hinge\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003ePeter Millard for the idea of a pocket hinge\u003c\/li\u003e\n\u003cli\u003eTamar Hannah for the idea of using a print-in-place hinge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eChangelog\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e2024-10-15 First release.\u003c\/p\u003e\u003cp\u003e2024-10-23 uploaded to makerworld\u003c\/p\u003e\u003cp\u003e2025-02-19 added further instructions, uploaded F360 and updated plate 4: the back holder was missing the pockets for the nuts.\u003c\/p\u003e\u003cp\u003e                     \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTHIS MODEL IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\u003cfigure class=\"media\"\u003e\u003coembed url=\"https:\/\/www.youtube.com\/watch?v=sHj5G6t1qvY\u0026amp;t=1s\"\u003e\u003c\/oembed\u003e\u003c\/figure\u003e\u003cfigure class=\"media\"\u003e\u003coembed url=\"https:\/\/www.youtube.com\/watch?v=59RAkriXEh0\"\u003e\u003c\/oembed\u003e\u003c\/figure\u003e\u003cp\u003eDesign by 駄目ｇ on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67375182840112,"sku":null,"price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_de7947da-64b9-42fa-9be6-e60d0a2bc723.png?v=1784228612","url":"https:\/\/mymadmanlab.com\/products\/rail-hinge-for-track-saw-and-mft-style-workbench","provider":"Mymadmanlab.com","version":"1.0","type":"link"}