{"product_id":"raspberry-pi-vesa100-mount","title":"Raspberry Pi - VESA100 Mount","description":"\u003ch2\u003eRaspberry Pi VESA 100 × 100 Mount\u003c\/h2\u003e\u003cp\u003eThis model allows you to securely mount your Raspberry Pi to the back of a monitor or TV using the \u003cstrong\u003eVESA 100 × 100 mm\u003c\/strong\u003e standard. It’s ideal for clean, hidden installations such as media centers, dashboards, or RetroPie setups.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5, 4 Model B, 3 Model B, and 3 Model B+ (same 58 × 49 mm hole spacing)\u003c\/li\u003e\n\u003cli\u003eVESA 100 × 100 mm mounting pattern fits most TVs and monitors\u003c\/li\u003e\n\u003cli\u003eHoles designed for standard M2.5 × 6 mm screws that form threads as they’re installed (no inserts or self-tapping screws required)\u003c\/li\u003e\n\u003cli\u003eIncludes four 3.5 mm spacers to offset the mount from the display's rear surface\u003c\/li\u003e\n\u003cli\u003eUses M4 screws for VESA mounting (tested with M4 × 25 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAssembly Instructions\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePosition the Raspberry Pi on the mount, aligning the holes on the board with the four mounting posts.\u003c\/li\u003e\n\u003cli\u003eFasten the Raspberry Pi to the mount using \u003cstrong\u003eM2.5 × 6 mm screws\u003c\/strong\u003e directly into the printed holes.\u003cul\u003e\u003cli\u003eThe shape of the hole is designed to allow an Mm2.5 thread to tape the hole.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlign the assembled mount and Pi with the VESA 100 × 100 mm hole pattern on your TV or monitor.\u003c\/li\u003e\n\u003cli\u003ePlace the 3.5 mm spacers between the mount and the display.\u003c\/li\u003e\n\u003cli\u003eSecure the entire assembly using \u003cstrong\u003eM4 screws\u003c\/strong\u003e (tested with M4 × 25 mm in my display).\u003cul\u003e\n\u003cli\u003eDo not overtighten.\u003c\/li\u003e\n\u003cli\u003eVerify that the screw length is appropriate for your display so they do not extend too far into the back panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eScrew length for the VESA mount may vary by display model; check your display depth before tightening.\u003c\/li\u003e\n\u003cli\u003eMount holes for the Raspberry Pi are designed for standard M2.5 screws that cut threads as they’re installed — no inserts or self-tapping screws are needed.\u003c\/li\u003e\n\u003cli\u003eWorks well for RetroPie, Home Assistant, Pi-hole, media servers, and other Raspberry Pi projects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExample Uses\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount a RetroPie gaming setup directly behind a TV.\u003c\/li\u003e\n\u003cli\u003eHide a Home Assistant or Pi-hole installation behind a monitor.\u003c\/li\u003e\n\u003cli\u003eKeep a media server, dashboard, or small network device out of sight while maintaining airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by BeardedFox on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391399788848,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_f9f9aa47-b6ca-459e-8811-c89c1db1d530.png?v=1784750346","url":"https:\/\/mymadmanlab.com\/products\/raspberry-pi-vesa100-mount","provider":"Mymadmanlab.com","version":"1.0","type":"link"}