{"product_id":"scaleable-tree-support-marble-run-figure-8-style","title":"Scaleable Tree Support Marble Run - Figure 8 Style","description":"\u003cp\u003e\u003cstrong\u003eIntroducing the Figure 8 Tree Support Marble Run!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you’re looking for a challenge you have found the right place! But brace yourself, this print takes quite some time as it will fill your build plate. \u003c\/p\u003e\u003cp\u003e**Pictured model is scaled down to 47% for use with 6mm marbles \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis marble run was modeled using a \u003cstrong\u003e15mm\u003c\/strong\u003e steel ball with the track trenches at 16mm. With that said, this model is completely scalable below 100% so you are free to resize to accommodate any marble size below 15mm! (If you have a large build plate you can go bigger!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI have attached a screenshot of the settings I used for supports in Bambu Studio (based from PrusaSlicer). With that said, you may need to adjust settings depending on your preferred slicer.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/123904\/2023-10-27_jmdxkh0pwicz.png\"\u003e\u003c\/figure\u003e\u003cp\u003e*\u003ci\u003eEdit (5\/20\/23)\u003c\/i\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ci\u003eTop interface spacing can be set to 0.0mm to help strengthen support connections as they won’t be removed!\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eMax bridge Length will vary the support structure under the model, I recommend a 10mm or smaller depending on scale!\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ci\u003e*Important note\u003c\/i\u003e: If you are having trouble generating support under the \u003ci\u003ewhole bottom side\u003c\/i\u003e of the track, you may have to paint them on manually. This is easily done in Bambu Studio, not sure for other slicers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLayer Height: 0.2mm (Your preference)\u003c\/li\u003e\n\u003cli\u003eInfill: 10-15% is perfect\u003c\/li\u003e\n\u003cli\u003eWalls: 2 perimeters minimum\u003c\/li\u003e\n\u003cli\u003eBottom layers: Bump this up to \u003cstrong\u003e4\u003c\/strong\u003e-\u003cstrong\u003e5 Layers\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScale Range 47%-100%\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeel free to share your masterpiece!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by 3DVJModels on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67400133542192,"sku":null,"price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_cc3ca4bc-12cc-41bf-83d9-5571c396ed88.jpg?v=1784928749","url":"https:\/\/mymadmanlab.com\/products\/scaleable-tree-support-marble-run-figure-8-style","provider":"Mymadmanlab.com","version":"1.0","type":"link"}