{"product_id":"seven-bay-nas-shelf-for-10-inch-mini-rack-3u","title":"Seven bay NAS shelf for 10 inch mini rack, 3U","description":"\u003cp\u003eThis drive rack holds seven standard SATA drives in a way that they are hot-swapable.  It takes up 3U on a 10\" mini rack (I used the GeeekPi one).  The main body takes a while to print and is a bit heavy, but it's very sturdy once installed.  It's designed to use CoolerMaster toolless drive rails or 3D printed rails that are compatible.  To make this work as a hotswappable system, you'll need to get 7 SATA adapters (around $40 total).  I'd recommend printing in ABS or ASA, but I don't see why PLA or PETG wouldn't work fine.\u003c\/p\u003e\u003cp\u003eAll parts should print on a bed of at least 254x254.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The drive sled itself is licensed under \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc\/4.0\/\"\u003eCC-Attribution-Noncommercial 4.0\u003c\/a\u003e.  The entire rest of this project is original work and licensed under \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/4.0\/\"\u003eCC-Attribution-ShareAlike\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eChangelog\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eV1.1 — 2025-02-09 — Added fan housing that mounts on the back\u003c\/li\u003e\n\u003cli\u003eV1.0 — 2025-02-06 — Initial release\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBOM\u003c\/h2\u003e\u003ch3\u003eFasteners\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14 of M3x10 (2 per drive)\u003c\/li\u003e\n\u003cli\u003e8 of M3x10 (2 per fan)\u003c\/li\u003e\n\u003cli\u003e10 of M3x16 (2 per drive)\u003c\/li\u003e\n\u003cli\u003e4 of M3x25 (for the fan housing)\u003c\/li\u003e\n\u003cli\u003e28 of M3 heat set inserts (4 per drive, Voron style, M3x5x4)\u003c\/li\u003e\n\u003cli\u003e8 of M3 heat set inserts (2 per fan, Voron style, M3x5x4)\u003c\/li\u003e\n\u003cli\u003e6 of 2mm zip ties [\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B019GIEWWS\"\u003eOpt 1\u003c\/a\u003e, \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B0094DE1WM\"\u003eOpt 2\u003c\/a\u003e, \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/west3d.com\/products\/voron-zip-tie-kit\"\u003eOpt 3\u003c\/a\u003e]\u003c\/li\u003e\n\u003cli\u003eDrive mounting screws (optional if using actual CoolerMaster sleds)\u003c\/li\u003e\n\u003cli\u003eMinirack mounting hardware (depends on the rack system you're using)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDrive Sleds (choose one)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/280662-cooler-master-hdd-rail\"\u003eDrive Rails by Labman\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/1180176\/files\"\u003eDrive Rails Sled\u003c\/a\u003e, remixed from Labman's design (link above)\u003c\/li\u003e\n\u003cli\u003eCoolerMaster rails (\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B08RBX9994\"\u003eopt1\u003c\/a\u003e, \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/Eshylala-x4\/dp\/B07WGTPBFH\"\u003eopt2-unverified\u003c\/a\u003e, \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.us\/item\/2251832875899626.html\"\u003eopt3-unverified\u003c\/a\u003e, \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.us\/item\/3256801406594545.html\"\u003eopt4-unverified\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSATA Adapter (Optional)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B07CKXFKM5\"\u003eOpt 1, verified\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B00EK9B13W\"\u003eOpt 2, verified\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.us\/item\/3256805587306208.html\"\u003eOpt 3 (SATA Male to Female), unverified\u003c\/a\u003e - has SAS option also unverified\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.us\/item\/3256805762526608.html\"\u003eOpt 4, unverified\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.us\/item\/3256807202566649.html\"\u003eOpt 5, unverified\u003c\/a\u003e - has SAS option, also unverified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFans\u003c\/h2\u003e\u003cp\u003e4 of 40mm x 40mm x 20mm PC fans\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B072JK9GX6\"\u003eNoctua NF-A4x20\u003c\/a\u003e (FLX, PWM) - verified\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.com\/dp\/B07VXT95GN\"\u003eGDSTime GDA4020\u003c\/a\u003e (any of the 12v options) - verified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrep\u003c\/h2\u003e\u003cp\u003eIf using the brim that's turned on by default in the project files, make sure to trim them off of the main housing and off of the drive sled.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003e1. Install heat set inserts into the back of the rack.\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 28.94%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/e60b3d8d-cc80-4b1a-b4c1-ccb38eda5c0d.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e2. Install heat set inserts into the SATA mounting bracket.\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/f751a974-e443-4a22-9e25-3802f2212865.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e3. Use 2 of the M3x10 bolts to attach the SATA adapter to the SATA bracket.\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/4a71c46b-eb74-49aa-a3f7-8cf99a7429f1.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e4. Use 2 of the M3x16 bolts to attach the SATA bracket to the back of the housing.  Don't install bolts in the outer most holes on the top, and one in from left and one in from the right on the bottom (lines up with holes in fan housing).\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/1d42996a-e685-4dca-b475-74e96013d2c8.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e5. Install 2 heat set inserts into the screw holes of your fans on the side that is fully open.  Install them on opposite corners.\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/0487608d-8005-4548-b136-9690fcbe3c76.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e6. Slide the fans into the fan mounting, passing the wires through the holes first and lining the wires up with the flat sides of the fan holes\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/2fec270c-064b-496c-bc2d-d91fbbc23d27.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e7. Install two bolts through the fan housing and into each of the fans, lined up with the heat set inserts.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/bace0cfd-9e78-4269-966c-15dcb884a8ea.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e8. Slide the fan housing over the sata brackets and bolt into place with the four M3x25 bolts.\u003c\/p\u003e\u003cp\u003e9. Zip tie the fan cables through the top zip tie spots.\u003c\/p\u003e\u003cp\u003e10. Mount the housing to your rack using fasteners as appropriate for your rack system.\u003c\/p\u003e\u003cp\u003e11. Plug in your PSU and HBA card \/ motherboard.\u003c\/p\u003e\u003cp\u003e12. Use the lower zip tie locations to secure your sata data and power cables, along with the fan cables.\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001078841\/design\/2c238b99-959b-4d31-aa84-11ad4e993268.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e13. Install your drives onto your rail system of choice (see above options).\u003c\/p\u003e\u003cp\u003e14. Slide your drives into the rack.\u003c\/p\u003e\u003cp\u003e15. Done!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by RagingRoosevelt on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67397076582704,"sku":null,"price":150.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_8ac68076-9985-40f7-8b86-275c578bb106.png?v=1784860674","url":"https:\/\/mymadmanlab.com\/products\/seven-bay-nas-shelf-for-10-inch-mini-rack-3u","provider":"Mymadmanlab.com","version":"1.0","type":"link"}