{"product_id":"singer-7426-large-spool-sewing-guide","title":"Singer 7426 Large Spool Sewing Guide","description":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eDid a remix of the linked spool adaptor for the Mrs. She didn't like the way the upper arm sat to route the thread as it didn't align with the guides for her machine. I rebuilt the base and the upper guide from scratch.\u003c\/p\u003e\u003cp\u003eThe upper arm is effectively a cylinder with a ring at the top. Printed on a raft with Tree support.\u003c\/p\u003e\u003cp\u003eThe base has a taller holder to hold the spool in place so there's no need for any additional \"pole\". It also has a hole that fits the foot of the machine so that it doesn't move at all.\u003c\/p\u003e\u003cp\u003eNote: The lower says \"SEW WHAT?\" On the part that will be hidden when a spool is installed. Lame Dad Joke.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eSew What?\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch2\u003ePrint Settings\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePrinter Brand: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCreality\u003c\/p\u003e\u003cp\u003e                                            \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrinter: \u003c\/strong\u003e                     \u003c\/p\u003e\u003cp\u003eEnder 3 Pro\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRafts: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes\u003c\/p\u003e\u003cp\u003e                                            \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSupports: \u003c\/strong\u003e                     \u003c\/p\u003e\u003cp\u003eYes\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResolution: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e.12\u003c\/p\u003e\u003cp\u003e                                            \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInfill: \u003c\/strong\u003e                     \u003c\/p\u003e\u003cp\u003e20% - 40 %\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e Doesn't matter PLA\u003cbr\u003ePearl White                    \u003cbr\u003e                        \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e                    \u003c\/p\u003e\u003cp\u003eUsed really high resolution at the request of the Mrs, (0.12) but 0.2 would work fine.\u003c\/p\u003e\u003cp\u003eCura 6.2\u003cbr\u003eInfill 40% all around, in Tri-Hexagon - Gyroid is my preferred but the Upper guide failed multiple times using that pattern.\u003c\/p\u003e\u003cp\u003eRaft support WITH Tree at 55% Branch Angle for the Upper\u003cbr\u003eNo Supports needed for lower.\u003c\/p\u003e\u003cp\u003e40mm\/s Speed\u003cbr\u003e\"Mesh Fixes\" in Cura: Maximum Resolution 0.5, Maximum Travel Res: 0.7\u003c\/p\u003e\u003ch2\u003ePost-Printing\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_u6n4c6hu9s7w.jpg\" alt=\"image\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_ndv338ytr4xx.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_qt4sgv7p8adv.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_0gukia91eo4l.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_0m66bcgegy9e.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_nc8icx0j7u3j.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_he2i1qu7qfbp.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e                \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000623546\/design\/2024-09-05_dtu056j98h0r.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eDesign by maddmaxx308 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67398938558768,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_6c547a4a-d236-4150-aec0-8942f61bd12a.jpg?v=1784893159","url":"https:\/\/mymadmanlab.com\/products\/singer-7426-large-spool-sewing-guide","provider":"Mymadmanlab.com","version":"1.0","type":"link"}