{"product_id":"spool-holder-for-bare-and-honeycomb-storage-wall","title":"Spool Holder for Bare and Honeycomb Storage Wall","description":"\u003cp\u003eWanted to get cool Wall mounted Spool Holder for my new Bambu A1 Mini printer and didn't find anything really like one I want, so my solution was to make my own.  And actually it went to pretty cool project in my opinion so I decided to share it :) .\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSo here is a Spool Holder you can mount to Bare wall and as an extra bonus to HSW (Honeycomb Storage Wall). I will make in addition one for MultiBoard as well, but first I will need to print some MultiBoard panels for prototyping as I haven't printed them yet.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e Holder is a multipart model so You will have to assemble it  (I don't think it is any hard to understand how) and You will have options. I Mean, You can Mount it to Bare or HSW wall and if You don't want to use a PTFE guiding from Holder to printer, You Don't have to print a Guide part, but if you do then there You will have 2 options.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is Rough visual of assembly:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_3f6768b14f91e.jpg\"\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eList of Parts to use on Bare Wall\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"table\" style=\"width:98.39%;\"\u003e\u003ctable class=\"ck-table-resized\" style=\"border:2px solid hsl(0, 0%, 0%);\"\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eMain Wall Bracket\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBracket have 6 Screw Holes \u003cstrong\u003eoptimised for 3.5mm standard screws\u003c\/strong\u003e with countersunk head. You can use a 3mm Screws with smaller heads if in Your case 3.5mm screws  have to big heads as they must completely sunk into chamfered slots. 4 screws should be enough, but extra 2 are for stronger hold. When You install Main Wall Bracket make sure that Opened sides of slides are faced UP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_5f2544143cece.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003cstrong\u003eLeft and Right Sides of the Holder\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHolders Slides in Main Bracket rail slides from Top. Important moment here. If you are going to use a \u003cstrong\u003eGuide Bracket\u003c\/strong\u003e, then You have to install it between Left and Right Holder side before  you slide them into Main Brackets slide rails.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_0564cde219bf9.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_16c9d46cf9f39.jpg\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Guide Bracket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is optional. Print and use it if You like the idea like me. Guide for Filament and PTFE tube. 2 different Types To be used with Threaded PTFE coupler holder Funnel or one with simple Locking Ring. So choose the one You like more. One thing to know. This is a part of model You will have to use a Supports when printing. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cstrong\u003eFor Holder with Locker Ring:\u003c\/strong\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_5c18dd8f9a1d7.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Holder With Thread:\u003c\/strong\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_94e56f9a44fb7.jpg\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003cstrong\u003ePTFE Coupler Holder Funnel\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e So we have a two styles. Ringed one and Threaded one. Screw in Your decided Holder Funnel a PC4M10 PTFE coupler and install it to Filament Guide Bracket.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cp\u003e\u003cstrong\u003eRinged one:\u003c\/strong\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_2aebe50361967.jpg\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_f39de04483cea.jpg\"\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThreaded one:\u003c\/strong\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_a9b71204d637a.jpg\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003cstrong\u003eTop Cap for Main Bracket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNot necessary to use, but gives better aesthetical look and better Side Holder wall hold in the Main Bracket. Put them on until they snaps in.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cfigure class=\"image image_resized\" style=\"width:100%;\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_0130a46bbe7f8.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_00cf1f0b7ed78.jpg\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eList of Parts to use on Honeycomb Storage Wall (HSW)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTwo different Styles\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"table\" style=\"width:97.08%;\"\u003e\u003ctable class=\"ck-table-resized\" style=\"border:2px solid hsl(0, 0%, 0%);\"\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003cstrong\u003eMain Honeycomb Storage Wall Bracket with Hexed Inserts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Main wall bracket to be used with standard Honeycomb Storage wall Hex hole inserts.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\u003cfigure class=\"image image_resized\" style=\"width:97.29%;\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_8df2f7c512e12.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);vertical-align:top;\"\u003e\n\u003cp\u003e\u003cstrong\u003eMain Honeycomb Storage Wall Bracket with M4 screw holes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Main wall bracket to be used with standard Honeycomb Storage wall M4 screw hole inserts.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\u003cfigure class=\"image image_resized\" style=\"width:98.09%;\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_ee1a10405771a.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eList of Hardware needed\u003c\/p\u003e\u003cfigure class=\"table\" style=\"width:95.93%;\"\u003e\u003ctable class=\"ck-table-resized\" style=\"border:2px solid hsl(0, 0%, 0%);\"\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cp\u003e\u003cstrong\u003ePTFE Tube Coupler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eP4M10. One piece.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\u003cfigure class=\"image image_resized\" style=\"width:97.46%;\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_846fc45709534.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cp\u003e\u003cstrong\u003e3.5 or 3.0 Countersunk Screw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor fitting to Bare Wall\u003c\/p\u003e\n\u003cp\u003eFrom 2 to 6 pieces. More gives stronger hold.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_0dc6243ee3636.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\n\u003cp\u003e\u003cstrong\u003eM4 Machine Countersunk Screw and M4 Nut\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor fitting to Honeycomb Storage Wall (HSW)\u003c\/p\u003e\n\u003cp\u003eFrom 2 to 6 pieces. More gives stronger hold.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1px solid hsl(0, 0%, 0%);\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-04-13_e84c9153b801.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThat's it. If You like it, Enjoy!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYou can Buy me a coffee if You want to support me in my work here :)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.buymeacoffee.com\/warlogh\" rel=\"nofollow noopener\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/850863\/2024-03-16_5923e8a1a0113.jpg\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.buymeacoffee.com\/warlogh\" rel=\"nofollow noopener\"\u003ehttps:\/\/www.buymeacoffee.com\/warlogh\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e(\u003c\/strong\u003eAnd very Big Thank You For interest in my work\u003cstrong\u003e)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesign by warlogh on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67409498177840,"sku":null,"price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2141dbd4-9f5b-47a6-92fa-38d864e6b962.png?v=1785264245","url":"https:\/\/mymadmanlab.com\/products\/spool-holder-for-bare-and-honeycomb-storage-wall","provider":"Mymadmanlab.com","version":"1.0","type":"link"}