{"product_id":"square-card-reader-case","title":"Square Card Reader Case","description":"\u003cp\u003eIf you've got a newer \u003ca target=\"_blank\" href=\"https:\/\/squareup.com\/shop\/hardware\/us\/en\/products\/chip-credit-card-reader-with-nfc\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eSquare Card Reader\u003c\/strong\u003e\u003c\/a\u003e with tap-to-pay and the chip card slot, this print is for you! This Square Card Reader case has a raised tab with a hole to connect a lanyard or anything with a clip. I've used both versions shown on a lanyard at recent pop-up events. I hope this will help at your events, provide an item 3D printing businesses can sell to support to other vendors, and even support garage sale or yard sale hosts.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe case protects your card reader, keeps it handy, and stops it from \"walking away.\" It also prevents accidental charges on your personal card by avoiding storing it between charges in the same place as your wallet (voice of experience right here!).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e\u003cstrong\u003eIMPORTANT NOTE\u003c\/strong\u003e\u003c\/span\u003e: \u003ci\u003eThis fits \u003cstrong\u003eonly \u003c\/strong\u003ethe larger reader with the card insert slot that measures 67mm x 67mm x 10.8mm or 2.65” x 2.65” x 0.43. It's too big for the original magstripe style that plugs into your phone or tablet's headphone or charging port. \u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaking the Most of Your Make\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eI've included Print Profiles based on PLA and one I've optimized for TPU. Both of these have custom support paints to only use a little bit of support where needed.\u003c\/li\u003e\n\u003cli\u003eThe prints shown in the photos are in glow-in-the-dark PLA and rainbow TPU. I'm sure it'd be great in other filament types. However, I designed and tested it as a fairly snug fit. You may need to adjust the size to fit since other filaments may have different amounts of shrinkage than the two PLA's and one TPU I've printed in so far.\u003c\/li\u003e\n\u003cli\u003eThis prints vertically with limited build plate surface contact. Make sure you've got a clean and level bed and choose filament with known good bed adhesion. If you don't print from Bambu Handy or open the Print Profile in Bambu Studio, I recommend turning on support for build plate only. The model prints best vertically on the bottom edge with minimal supports under the bottom corners for cleaner edges on those overhangs. It should stick and print without supports with a well-tuned machine and filament. It just won't look as nice.\u003c\/li\u003e\n\u003cli\u003eNO PRESALE OR USE ATTRIBUTION REQUIRED! There's no Creative Commons option that maintains ownership rights and also waives attribution, so I chose the closest option. Just tell people where you got it if asked. Please acknowledge the source and keep the same terms if you remix. Thanks!\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIf this design helps you at your next event or brings you additional sales from other businesses, please rate and boost when you can.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesign by 3DMagpie on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67409957912880,"sku":"MW-472554","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_39db5a65-15c1-470f-91a2-ceb170efac61.png?v=1785283997","url":"https:\/\/mymadmanlab.com\/products\/square-card-reader-case","provider":"Mymadmanlab.com","version":"1.0","type":"link"}