{"product_id":"sturdy-moss-pole-parametric","title":"Sturdy moss pole (parametric)","description":"\u003cp\u003e\u003cstrong\u003eMade for climbing plants like monstera, photos, or ivy\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e you will need a rod, wooden dowel or similar for this print.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMy monstera was falling over because of its size. I decided to kill two stones with one bird and made this design. The printed part is essentially a cage to keep sphagnum moss in, which the plant can set air roots in and climb on. By sliding the print onto a pole (shoved into the soil as deep as your pot allows), you get a sturdy support that looks pretty, will keep your plant happy (probably), and is expandable.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe model I printed is made for a 26.5mm rod, because that is what I had at home. I will add print profiles for common diameters from like Home Depot or Amazon, but let me know if you have need for a specific diameter and I'll try and upload a for you c:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe pillars can be attached to each other by aligning the top tabs of one with the bottom slots of the other. You will need one printed cap as well, otherwise the support will be weak.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eParametric design for 3D printing\u003c\/strong\u003e\u003cbr\u003e\u003ci\u003eOpen the .step file in your preferred CAD program and look for \"parameters\".\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe cad file is pretty forgiving when changing dimensions, it should be fine for most reasonable values. Note that the tolerances are tight by default (.15mm). If it's too tight, just change \u003ci\u003etolerance_offset\u003c\/i\u003e to like .20mm or similar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe only editing you should have to do is if you increase the height of the pillar, because that will add hexagons to the pattern.\u003c\/p\u003e\u003cfigure class=\"table\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003e\n\u003cfigure class=\"image image_resized image-style-side\" style=\"width: 49.71%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001131649\/design\/2025-02-20_411cd4f6207338.png\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdit the first emboss on the timeline\u003c\/p\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e\n\u003cfigure class=\"image image-style-side\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001131649\/design\/2025-02-20_5579d5246a50f8.png\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelect the sketch profiles that are not selected. \u003c\/p\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e\n\u003cfigure class=\"image image-style-side\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001131649\/design\/2025-02-20_424a4b5530abd.png\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eStep 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClick ok.\u003c\/p\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003e\n\u003cfigure class=\"image image-style-side\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001131649\/design\/2025-02-20_de7d255682016.png\"\u003e\u003c\/figure\u003e\u003cp\u003eDone! The hex pattern has adjusted istelf c:\u003c\/p\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you like what I publish, make sure to download the models and rate the print profiles! It helps me out and lets me know what to improve for future projects! Thank you in advance!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by enbyvalent on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67442831229232,"sku":null,"price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_f41fbb4a-bde3-433f-b187-b5833b32d5bb.png?v=1785783754","url":"https:\/\/mymadmanlab.com\/products\/sturdy-moss-pole-parametric","provider":"Mymadmanlab.com","version":"1.0","type":"link"}