{"product_id":"teardrop-nfc-tag-keychain-2","title":"Teardrop NFC Tag Keychain","description":"\u003cp\u003eSimple teardrop shaped NFC tag keychain that encloses a 25mm NFC chip.\u003c\/p\u003e\u003cp\u003eThis model includes a 26 mm wide and 1 mm deep internal chamber where the chip should be placed when printing. This should make this model compatible with most 25mm NFC tags. It has been tested with:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" href=\"https:\/\/www.amazon.co.uk\/gp\/product\/B07LFCY755\" rel=\"nofollow noopener ugc\"\u003e25mm NTAG 215 PVC Cards\u003c\/a\u003e (24.9 × 0.92 mm non-adhesive NFC coins)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" href=\"https:\/\/www.amazon.co.uk\/gp\/product\/B07Q43G3TC\/\" rel=\"nofollow noopener ugc\"\u003e25mm NTAG 215 Stickers\u003c\/a\u003e (25 × 0.25 mm adhesive NFC chips)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe recess in the front of the blank version of the keychain can accommodate \u003ca target=\"_blank\" href=\"https:\/\/www.amazon.co.uk\/dp\/B07MSBFV98\/\" rel=\"nofollow noopener ugc\"\u003ea 25mm round sticker\u003c\/a\u003e if you want to print or add custom labels to your NFC tags.\u003c\/p\u003e\u003ch4\u003eAssembly\u003c\/h4\u003e\u003cp\u003eWhen slicing the model, a pause should be added just after the 2mm layer (see \u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/insert-pause-or-custom-g-code-at-layer_120490#insert-pause-at-layer\" rel=\"nofollow noopener ugc\"\u003ehow to add a pause at a specific layer in Prusa Slicer here\u003c\/a\u003e). When adding the pause in Prusa Slicer, make sure to select the layer just after it (2.20 at 0.20mm layer height, 2.10 at 0.10mm, …) as the pause happens at the start of the selected layer.\u003c\/p\u003e\u003cp\u003eOnce your print is paused (approximately 10min after it started when printing at 0.20mm layer height on a Prusa i3 MK3), you should be able to insert your NFC card or stick your NFC sticker in the recess at the center of the model. Once done, resume printing and your printer should then bridge over the gap left without any issue.\u003c\/p\u003e\u003ch4\u003ePrinting\u003c\/h4\u003e\u003cp\u003eThe model should be printed flat side down at 0.20mm layer height (the model was created so the pocket for the NFC tag and the logo are aligned with this value, 0.10 or 0.05 mm layer should still be fine though).\u003c\/p\u003e\u003cp\u003eAs said previously, a pause after the 2.00mm layer has finished printing should be added to let you insert your NFC tags.\u003c\/p\u003e\u003cp\u003eI also recommend enabling \u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/layers-and-perimeters_1748#thick-bridges\" rel=\"nofollow noopener ugc\"\u003eThick Bridges\u003c\/a\u003e to make sure the gap over your NFC chip is printed cleanly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRaft: no\u003c\/li\u003e\n\u003cli\u003eSupports: no\u003c\/li\u003e\n\u003cli\u003eLayer Height: 0.20mm\u003c\/li\u003e\n\u003cli\u003eInfill: 100%\u003c\/li\u003e\n\u003cli\u003eThick bridges: recommended\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eChangelog\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eV1.0\u003c\/strong\u003e (2022-07-12): Initial release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV1.1 \u003c\/strong\u003e(2024-01-10): Added a 1.6mm and 2mm chamber variant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by orax on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391083774256,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_0dfcb752-f929-480f-be0e-ab5a3d177f04.jpg?v=1784740842","url":"https:\/\/mymadmanlab.com\/products\/teardrop-nfc-tag-keychain-2","provider":"Mymadmanlab.com","version":"1.0","type":"link"}