{"product_id":"thread-and-bobbin-holder","title":"Thread and Bobbin Holder","description":"\u003cp\u003eThis holder is designed to hold thread spools and bobbins together. The large circle has several rings that friction fit on several different styles\/brands of thread spools. They have been tested with Isocord, Glide, Finess, and Aurofill. It probably works with others as well; there are 3 basic spool designs they all seem to use. \u003c\/p\u003e\u003cp\u003eThe smaller circle is for bobbins and should fit any design, we've tested generic bobbins and several brand specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrinting Tips\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou can print the first few mm to test the fit with your spools. I designed this to print on our Bambu X1C, your final dimensions may vary a bit with your printer and filament.\u003c\/p\u003e\u003cp\u003eYou'll want to have well dialed in retraction to avoid stringing between the two vertical posts; too much stringing will change the diameter so it won't fit the spools anymore.\u003c\/p\u003e\u003cp\u003eThe vertical posts rely on good layer adhesion for strength, so you might want to avoid matte colors and other filaments where the layers aren't as strong.\u003c\/p\u003e\u003cp\u003eDesign by cseelye on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67396193354032,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a2380a2d-717e-423b-833d-8f85286ebb38.jpg?v=1784843151","url":"https:\/\/mymadmanlab.com\/products\/thread-and-bobbin-holder","provider":"Mymadmanlab.com","version":"1.0","type":"link"}