{"product_id":"tictactoe-with-magnets","title":"TicTacToe (with magnets)","description":"\u003cp\u003eA portable version of the classic TicTacToe game with a satisfying snap due to the power of magnets.\u003c\/p\u003e\u003cp\u003eIdeal for when traveling with kids.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eVersions for use with 4x2 or 6x3 magnets\u003c\/p\u003e\u003cp\u003eOptional mount to place it on an angle on a desk.\u003c\/p\u003e\u003cp\u003eOptional mount to clip it to the air vents on the dashboard of a car.\u003c\/p\u003e\u003cp\u003eCan be printed on multi-color or single-color machines.\u003c\/p\u003e\u003cp\u003ePLA works fine, PETG may be a good choice when leaving this in a (hot) car.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eYou'll need 45 magnets, 8 additional ones for one mount (53 in total), or 12 additional ones for both mounts (57 in total)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eDesk Mount\u003c\/h2\u003e\u003cp\u003eAttaching this (optional) mount it raises the game up to a 15 degree angle.\u003c\/p\u003e\u003cfigure class=\"table\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_b4542778ba147.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_f1325f767c0a9.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eCar Clip\u003c\/h2\u003e\u003cp\u003eThis (optional) clip allows mounting the game to the ventilation grill of a car.\u003c\/p\u003e\u003cp\u003eProbably best to use the 6x3 magnet version for this so it's a bit more strongly attached.\u003c\/p\u003e\u003cp\u003eBe careful when gaming \u0026amp; driving!\u003c\/p\u003e\u003cfigure class=\"table\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_3f7402fd783fe.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_dfaccbd66fafd.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eAssembly instructions:\u003c\/h2\u003e\u003cfigure class=\"table\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_2a9b753b82a77.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInstall 4 magnets in each block.\u003c\/p\u003e\n\u003cp\u003eInstall 1 magnet in each pocket in the holder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMagnets should fit flush and snugly, you can use a drop of super glue if needed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMake sure all magnets in the block are oriented in the same way.\u003c\/p\u003e\n\u003cp\u003eMake sure the magnets in the holder are oriented so they attract the block magnets.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_5d36a3ae53f48.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDrop a block into one of the outer side pockets of the holder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMake sure the magnets touch and attract each other.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_f0c2dff6679dd.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003eAdd a pin through the side of the holder and push it in partly to hold the block and allow it to spin freely.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_2701d8ec8d79c.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAdd a block to the next slot and push the pin in all the way.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePins should slide in easily but with enough friction to not fall out.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_63b12701e3b75.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003eRinse and repeat for the other side and other rows.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_ed27f7087d38e.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003eTest that all blocks can spin and the magnets snap them into position.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000481253\/design\/2024-06-01_76448152e8301.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIf you printed the optional desk and\/or car mount, insert magnets in the base of the holder and mount(s).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMake sure they attract when snapped together.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePressing against a table to ensure they are flat.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThey should fit (very) snugly, a drop of super glue can help.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003eDesign by Brekel on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67410079646000,"sku":"MW-481253","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_0dfb1eab-3848-411d-bb3e-1efec8d79c83.png?v=1785287562","url":"https:\/\/mymadmanlab.com\/products\/tictactoe-with-magnets","provider":"Mymadmanlab.com","version":"1.0","type":"link"}