{"product_id":"tool-belt-driver-bit-holder-magnetic","title":"Tool belt driver bit holder (magnetic)","description":"\u003cp\u003eThis hooks onto a tool belt to carry driver bits.  I find this is the best system for me.  Swapping driver bits with one hand is super easy.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis doesn't work for those tiny driver bits, but those are terrible for quick changing anyway.  The holes for the bits are 30mm deep, and what best works are driver bits that typically measure 2\" in length.  Of course other bits with hex shanks will work here too, such as drill, counter sink and self centering bits.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt has a slight curve to better fit a belt profile, and has optional support for magnets on the bottom with a cap to seal.  I have tight fittings so the magnets and cap press fit - the layer lines providing a lot of friction.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMy tool belt of choice for remodeling, wood working etc. is the Magnogrip tool belt (pictured) which is pretty beat up now.  For years I was putting driver bits into the magnet pouch on the front which works ok if you have 1 or 2 and not much else. But that pouch quickly gets filled and hunting around for the right driver bit is frustrating.  I don't like storing driver bits on my driver itself.  I find I need a lot, and I dislike holders that clip bits.  So I designed this.  This is my second iteration.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMy first iteration had the magnets go down with the driver bit, but even with tight fittings down there some magnets would come out over time, and the magnets were too strong.  I didn't want to ca glue the magnets in place.  So this design has magnets inserted from the bottom with a cap.  With a 1mm gap between driver bit and magnet, they provide just a little force to hold them down.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI printed on a Bambu X1 Carbon which was tight tolerances, and pictured here is Bambu PETG-CF filament, which is super matte and grippy.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis is sized to accept\u003cstrong\u003e 6mm x 2mm magnets\u003c\/strong\u003e (diameter x thickness) - you need strong ones.\u003cbr\u003eEDIT: Also included a model accepting \u003cstrong\u003e6mm x 2.5mm magnets\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eDesign by glen on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67436278513968,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_9ef0936f-3005-4433-8eea-2b2f6114e3e1.jpg?v=1785734034","url":"https:\/\/mymadmanlab.com\/products\/tool-belt-driver-bit-holder-magnetic","provider":"Mymadmanlab.com","version":"1.0","type":"link"}