{"product_id":"tt-motor-mount","title":"TT Motor Mount","description":"\u003cp\u003eThis is a holder for the ‘yellow TT motor (dual axis)’ that you can find on aliexpress. It is often used with Arduino projects together with an H-bridge driver board. These motors have an internal gear reduction of about 1:48 and often run at 3.5 to 6 Volts.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis holder is designed so you can ‘snap’ the motor in and it will probably hold the motor well enough but there is a self-tapping hole to lock down the middle end of the gearbox. (Just use a M3-10 screw but don't over-tighten it!)\u003c\/p\u003e\u003cp\u003eThere are 2 M3 holes to mount the gearbox body to the holder and 4 M3 holes at the corners to fix the holder plate to something else.\u003c\/p\u003e\u003cp\u003eThe 4 M3 holes are on a 30mm grid.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe gearbox is not symmetrical. The side that has a small cylinder next to the rotating axis should be inserted facing down. If you insert it the wrong way there will be a few mm space between the gearbox and the mounting plate!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eNot tested with the single axis motor from Bambu that looks very similar but only has one axis.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe .step file is included in the downloads.\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eBoosts appreciated!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by hb2024 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67448684806448,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_550a7000-591c-4ff4-97d3-3c1d8a89dbdd.png?v=1785819529","url":"https:\/\/mymadmanlab.com\/products\/tt-motor-mount","provider":"Mymadmanlab.com","version":"1.0","type":"link"}