{"product_id":"tube-and-chain-protection-minimal","title":"Tube and Chain Protection - Minimal","description":"\u003cp\u003eUpdate: Also works for the P2S. Replace the stock bit of foam tape with a more permanent solution. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eBambulabs started shipping printers with the top screw shortened and covered, so I modified this to just cover the side screw. That screw is partially covered, but this provides better protection and just snaps in place. This has been in use for many hundreds of hours of use, so it's secure.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIf you've got an enclosed printer and print anything hotter than PLA, you should print this in PETG or other higher-temp filament. Otherwise (open printer or PLA-only), PLA is good enough. Profiles are for 0.6 nozzle because that's what I'm running.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eJust print it and snap it in place. If it's not snapping in, rotate it 90 degrees; the orientation needs to match the steel bits that partially cover the screw.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eYou can boost at no cost to you and it really helps designers like me. Thanks!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by GC3D on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67408872898864,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2c89ffb7-eb1d-42f9-bacc-c0d12e728b31.png?v=1785232318","url":"https:\/\/mymadmanlab.com\/products\/tube-and-chain-protection-minimal","provider":"Mymadmanlab.com","version":"1.0","type":"link"}