{"product_id":"ultralight-magnetic-shelf-divider-165-x-55-mm-1","title":"Ultralight Magnetic Shelf Divider 165 x 55 mm","description":"\u003cp\u003eMagnetic shelf divider optimized to use the bare minimum amount of filament and print quickly. At 15.09 grams of material per they pack a lot of punch for a light model. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFeel free to tweak the print profile, but my attached one uses a single wall and .28mm layer height to speed up the print and minimize material usage. This is a long slim model, so some form of bed adhesive may be needed if you experience warping, but at the low infill it usually isn't a problem. The second print profile fits a full plate (for x and p series printers) with 19 dividers!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eNote: there are overhangs but they are filled by magnets in assembly, no supports are needed.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAssembly: place a small drop of your preferred adhesive into the holes on the bottom of the print and add one 10x3mm magnet to each hole. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFeel free to use and sell to your hearts content (but if you are making money at least send some boosts my way, deal?) 😊😊😊\u003c\/p\u003e\u003cp\u003eDesign by Peace Enlightens Err on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67394561409328,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b5145b25-b29f-456a-bd2e-3cdbcc90bcdd.png?v=1784819774","url":"https:\/\/mymadmanlab.com\/products\/ultralight-magnetic-shelf-divider-165-x-55-mm-1","provider":"Mymadmanlab.com","version":"1.0","type":"link"}