{"product_id":"usb-c-pd-to-xt60-adapter-for-fpv-goggles","title":"USB-C PD to XT60 Adapter for FPV Goggles","description":"\u003ch2\u003eUSB-C PD to XT60 Adapter for FPV Goggles\u003c\/h2\u003e\u003cp\u003eFPV goggles are typically powered via an XT60 connector. However, I didn’t want to use a LiPo battery to power mine, so I designed this adapter to work with a USB-C PD trigger board that provides 15V to the XT60 plug.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe small PD trigger breakout boards are inexpensive and easy to find — I used this type:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.de\/dp\/B0DSFF7MKT\"\u003ehttps:\/\/www.amazon.de\/dp\/B0DSFF7MKT\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMake sure to create a solid connection between the PD trigger board and the XT60 plug, and solder carefully. While these PD trigger modules are rated for up to 100W, I personally wouldn’t fully trust that rating — but 15V for FPV goggles should be perfectly fine.\u003c\/p\u003e\u003cp\u003eAfter setting the correct voltage using the DIP switches, you can glue the XT60 connector into place and close the lid. The case can be held together with a friction fit, or you can add a small amount of glue for extra security.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSupports are needed to print the USB-C and the XT60 pockets. The supports are already part of the Bambu Studio file.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ Disclaimer:\u003c\/strong\u003e\u003cbr\u003eUse this adapter at your own risk. Always test it with your goggles before flying to ensure everything works safely and reliably.USB-C PD to XT60 Adapter for FPV Goggles\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFPV goggles are typically powered via an XT60 connector. However, I didn’t want to use a LiPo battery to power mine, so I designed this adapter to work with a USB-C PD trigger board that provides 15V to the XT60 plug.\u003c\/p\u003e\u003cp\u003eDesign by rhaen on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67396148560176,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_96bb0d3a-69d9-46ac-89fd-5c7afcff4ede.png?v=1784842187","url":"https:\/\/mymadmanlab.com\/products\/usb-c-pd-to-xt60-adapter-for-fpv-goggles","provider":"Mymadmanlab.com","version":"1.0","type":"link"}