{"product_id":"wago-221-2411-triple-mount","title":"Wago 221-2411 Triple Mount","description":"\u003cp\u003eThis holder is designed to keep three Wago 221-2411 securely held in place via a snap fit, tightly gripping onto several features of the wagos.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWhen the wagos are in place, it is still very easy to open and close the levers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eYou can just slide in the wagos from the side (see pictures). You should feel some resistance and get a snap sound when fully seated.\u003c\/p\u003e\u003cp\u003eTo remove any wagos again, i would recommend to put a wire into one end of the wago, closing the lever and then pulling the wire to the side and slightly up. Please note that this can take quite a bit of force. You shouldn't do this too often, as with every pull-out you run the risk of damaging some of the smaller features.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIn the pictures you can see, that the Bambu Labs Orange PLA matches the wago color quite nicely.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eYou can attach this mount via double sided tape. I would recommend 3M VHB.\u003c\/p\u003e\u003cp\u003eThe base plate measures 37x30 mm.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIf anybody needs this mount for other arrangements (e.g. 1x) or with screw holes, just write me a comment!\u003c\/p\u003e\u003cp\u003e----------------\u003c\/p\u003e\u003cp\u003eUpdate (2024-06-21): increased wall thickness on the sides\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eUpdate (2025-04-17): added slim version with screw holes for triple mount\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWalls are now 1mm instead of 1.5mm resulting in a total width of 28mm for the triple mount, instead of 30mm\u003c\/li\u003e\n\u003cli\u003eI haven't got the walls to break in normal use yet, but they definitely feel a bit less sturdy! So just decide for yourself if you need the extra space gained by the slim version.\u003c\/li\u003e\n\u003cli\u003eSpacing to the top is now increased by 0.1mm. If you had issues with the top bulging out on the sides, maybe try the slim version.\u003c\/li\u003e\n\u003cli\u003eScrew holes fit a 3mm wide counter sunk screw perfectly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by LunarWhisper64 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67410222907696,"sku":"MW-505270","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c40157b6-d9e0-4b78-8a68-81e6e114a61e.png?v=1785296498","url":"https:\/\/mymadmanlab.com\/products\/wago-221-2411-triple-mount","provider":"Mymadmanlab.com","version":"1.0","type":"link"}