{"product_id":"wall-mount-phone-holder-pro_max_ultra","title":"Wall mount phone holder (Pro_Max_Ultra)","description":"\u003cp\u003eMy version of Wall-mounted Phone Holder \/ Stand\u003cbr\u003eIt will fit any iPhone Pro (Pro Max), Samsung Galaxy Ultra - even with thicker phone-case. \u003cbr\u003eit can be used as desk stand but it has bit too sharp angle as it is suppose to be mounted high for standing person(less looking down),\u003cbr\u003e also if you put in really tall phone vertically it might get tipped over, but it does work fine horizontally on flat surfaces.\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eFeatures 2 holes (3mm + 5mm) on the back side for the screw mounting \u003cbr\u003eand 2 big holes on the front for ease of installation (with self tap screws right through or just mark holes first, \u003cbr\u003epre-drill and screw in, easy 1-2min install)\u003c\/p\u003e\u003cp\u003eThe hole covers are there if you don't want to see the screws behind \u003cbr\u003e\u003cbr\u003eLot of surface on the back if you want to use double sided tape instead of screwing them to the wall.\u003cbr\u003eIf you increase infill to 40-50% could be use as infill object. \u003cbr\u003ePrints without the supports just fine (see the images for close up image of the big hole to know if the “imperfection” is acceptable, tho the caps will cover it and are sized for no support print, if you print with tree support for the big holes,  the caps might end up bit loose).\u003cbr\u003e \u003c\/p\u003e\u003cp\u003e(mine was printed with black mate pla and first prototype in the pic was infill object of white pla+ and matt black\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eOriginally loosely inspired by \u003cbr\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/255226\" rel=\"nofollow noopener\"\u003ehttps:\/\/makerworld.com\/en\/models\/255226\u003c\/a\u003e\u003cbr\u003e- but it was missing something I could use to securely mount it to the wall \u003cbr\u003e- it needed to be printed with supports, (tho my version certainly uses more material)\u003cbr\u003e- sharpen the angle of the “stand” is it's mean to be mounted close to head\u003cbr\u003e- made the little recess in the bottom curve so phone doesn't slide out easily\u003c\/p\u003e\u003cp\u003eDesign by xxxAXAxxx on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67437087850800,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_cfdd00da-5899-46c9-8a57-45a4548a0306.png?v=1785738992","url":"https:\/\/mymadmanlab.com\/products\/wall-mount-phone-holder-pro_max_ultra","provider":"Mymadmanlab.com","version":"1.0","type":"link"}