{"product_id":"working-m4-screws-and-nut","title":"Working M4 Screws and Nut","description":"\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you have found these models to be helpful, please consider clicking the boost button.\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eThe M4 screws (which includes a nut) were CADed with the intent of being able to use them in LOW STRESS SITUATIONS. The screws should be similar to the goBILDA M4 screws, which you can use interchangeably with these 3D-printed screws, as shown in a picture above. \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003ePrint Instructions:\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eI printed the screws on a Prusa MK3S+, which had a 0.25mm nozzle, using PLA. I used 100% rectangle infill, random seam position, a layer height of 0.1mm, and two perimeters. The print speed was 10-40mm\/s. \u003c\/p\u003e\u003cp\u003eNote: all the print files shown in the pictures were printed on an MK3S+ if you have a Bambu printer please use your own print settings as the \u003c\/p\u003e\u003cp\u003eMK3S+  does not compare.\u003c\/p\u003e\u003cp\u003eIf the M4 screws do not properly work, please let me know by leaving a comment or make. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHappy Printing!\u003c\/p\u003e\u003cp\u003eDesign by Ian on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67408134701360,"sku":"MW-164058","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a344623e-e77a-4392-836d-fc7c6a200f41.png?v=1785211294","url":"https:\/\/mymadmanlab.com\/products\/working-m4-screws-and-nut","provider":"Mymadmanlab.com","version":"1.0","type":"link"}