{"product_id":"x1-p1p-ptfe-tube-guide-to-fix-loading-issues-best-of-both-worlds","title":"X1 \/ P1P PTFE Tube Guide to fix loading issues - best of both worlds","description":"\u003cp\u003e\u003cstrong\u003eUpdate \u003c\/strong\u003e(5\/3\/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4\/17\/23 update directly below if it meets your needs.  Its been used for a few weeks with decent success, and seems mostly equivalent to this mod but is less filament to print and is more compact \u0026amp; stiffer, leading to less restriction on filament movement overall.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpdate \u003c\/strong\u003e(4\/17\/23):  \u003c\/p\u003e\u003cp\u003eThere is now a \"short-stack\" variation of the model, posted as a remix here: \u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/15497#profileId-15292\" rel=\"nofollow noopener\"\u003ehttps:\/\/makerworld.com\/en\/models\/15497#profileId-15292\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/media.printables.com\/media\/prints\/338542\/rich_content\/734d9458-5713-4b61-8d54-812587b5e426\/screenshot-2023-04-17-193716.png#%7B%22uuid%22%3A%22e6c39bc6-6e81-4036-9e81-9e7015b09e3c%22%2C%22w%22%3A1156%2C%22h%22%3A867%7D\"\u003e\u003c\/p\u003e\u003cp\u003ePros\/cons versus this model listed in the link above.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpdate \u003c\/strong\u003e(4\/11\/23):  \u003c\/p\u003e\u003cp\u003e\u003ci\u003eSomeone pointed out I posted the wrong STEP for the P1P version.  Uploaded the right STEP file. Thanks!\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpdate \u003c\/strong\u003e(1\/26\/23):  \u003c\/p\u003e\u003cp\u003e\u003ci\u003e Added a P1P version to address collision issues with frame on that printer. X1 users should use the original.  I don't have a P1P,  but a user has kindly verified that this version works for them.  Note that this version might be harder to print  because of lower bed surface area and you might want to go pretty slow printing it.  Would suggest using a small layer height like 0.16,  and\/or use a nice wide brim with small brim gap.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis remix combines what I consider to be the best of multiple solutions to this problem:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSnap-on ease of use from the semi-official Bambu PTFE bracket\u003cul\u003e\u003cli\u003eBut this bracket had routing issues that caused the tube to be either too tight or to hit the top glass.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuperior arc\/design from Mowcius's for curvature and keeping the tube angled correctly.\u003cul\u003e\u003cli\u003eBut this design came in two parts that had to be shoved together, and also tended to have the part rub the top glass.  It also has a thin support arm that tended to be just a little too easy to break in ABS for me, so I thickened it.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis design has the snap-on abilities of the Bambu PTFE bracket, with the better curvature of \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/309088-bambu-lab-x1-ptfe-minimum-radius-guide\" rel=\"nofollow noopener\"\u003ethe Mowcius bracket\u003c\/a\u003e, and the added strength on the support arm by adding 1.5 mm thickness to it.  I hope it works for you !\u003c\/p\u003e\u003cp\u003eTons of credit to \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/social\/434562-davidja92\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003edavidja92\u003c\/strong\u003e\u003c\/a\u003e who made a remix like this with a mesh-mix style.  I remodeled \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/337720-mowcius-radius-fix-with-bambu-type-connector\" rel=\"nofollow noopener\"\u003ehis approach \u003c\/a\u003ehere with my own finishing touches in CAD for a cleaner model and stronger arm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrinted at 102% scale in black ABS @0.2 layer height.  \u003c\/strong\u003eIf you print in PETG or other plastic that shrinks less than ABS, I would suggest trying 100% scale.  I'm sure it works well at smaller layer heights as well.\u003c\/p\u003e\u003cp\u003eDesign by Adam L on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67382531096880,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_dc17b18d-40ef-45e2-b005-73d052f7cf69.png?v=1784478760","url":"https:\/\/mymadmanlab.com\/products\/x1-p1p-ptfe-tube-guide-to-fix-loading-issues-best-of-both-worlds","provider":"Mymadmanlab.com","version":"1.0","type":"link"}