{"product_id":"zlsnas","title":"ZlsNas","description":"\u003ch3\u003e\u003cstrong\u003eZlsNas Documentation\u003c\/strong\u003e\u003c\/h3\u003e\u003ch4\u003eIntroduction\u003c\/h4\u003e\u003cp\u003eI've created a 3D-printed case for Raspberry Pi that integrates the Geekworm X1001, a cooling fan, and an E-Ink display module for real-time stats. \u003c\/p\u003e\u003ch4\u003eComponents\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.raspberrypi.com\/products\/raspberry-pi-5\/\" rel=\"nofollow\"\u003e\u003cstrong\u003eRaspberry Pi 5\u003c\/strong\u003e\u003c\/a\u003e: The core of the setup, providing processing power and connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/geekworm.com\/products\/x1001\" rel=\"nofollow\"\u003e\u003cstrong\u003eGeekworm X1001 PCIe M.2 Key-M NVMe SSD PIP PCIe Peripheral Board\u003c\/strong\u003e\u003c\/a\u003e: Enables the connection of an NVMe SSD for fast and reliable storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60x60 mm, 5V Fan\u003c\/strong\u003e: Preferably the \u003ca href=\"https:\/\/noctua.at\/en\/products\/fan\/nf-a6x25-5v-pwm\" rel=\"nofollow\"\u003eNoctua NF-A6x25 5V PWM\u003c\/a\u003e for its efficiency, although any compatible 60x60 mm 5V PWM fan will suffice.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.waveshare.com\/product\/displays\/e-paper\/epaper-2\/2.9inch-e-paper-module.htm?___SID=U\" rel=\"nofollow\"\u003e\u003cstrong\u003eE-Ink Display Module, 296x128, 2.9 inch\u003c\/strong\u003e\u003c\/a\u003e: Displays system stats and notifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHardware Requirements\u003c\/h4\u003e\u003cp\u003eThe assembly of ZlsNas requires precision fasteners to ensure secure mounting and optimum performance:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThreaded Inserts\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7x M2.5 inserts for mounting the Raspberry Pi and NVMe Geekworm.\u003c\/li\u003e\n\u003cli\u003e4x M3 inserts for securing the case lid.\u003c\/li\u003e\n\u003cli\u003e4x M2 inserts for attaching the E-Ink display.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eScrews\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4x M2.5 x 12mm screws (used DIN 7991 A2) for the Raspberry Pi from the bottom.\u003c\/li\u003e\n\u003cli\u003e3x M2.5 x 5mm screws (used BN 5687 A2) for the NVMe Geekworm.\u003c\/li\u003e\n\u003cli\u003e4x M3 x 12 screws (used DIN 7984TX) for the case lid.\u003c\/li\u003e\n\u003cli\u003e4x M2 x 3 screws (used DIN 7984 A2) for the E-Ink display.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAssembly and Installation\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eBegin by inserting the M2.5, M3, and M2 threaded inserts into the designated spots on the 3D printed case.\u003c\/li\u003e\n\u003cli\u003eSecure the \u003cstrong\u003eRaspberry Pi 5 \u003c\/strong\u003eto the \u003cstrong\u003eGeekworm X1001\u003c\/strong\u003e by attaching them to the case-mounted bracket, using M2.5 x 12mm screws for the Raspberry Pi connection and M2.5 x 5mm screws for fastening the NVMe. This method ensures the assembly is firmly held in place within the case.\u003c\/li\u003e\n\u003cli\u003eMount the \u003cstrong\u003eE-Ink Display\u003c\/strong\u003e to the Raspberry Pi using GPIO pins or a suitable connector, then secure it with M2 x 3 screws.\u003c\/li\u003e\n\u003cli\u003eInstall the \u003cstrong\u003ecooling fan\u003c\/strong\u003e in the designated spot, ensuring it is powered. \u003c\/li\u003e\n\u003cli\u003eThe assembled unit should then be placed into the case, and the lid secured using M3 x 12 screws.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003e3D Printing Parameters\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height\u003c\/strong\u003e: 0.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill\u003c\/strong\u003e: 20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports Required\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSoftware for E-Ink Display\u003c\/h4\u003e\u003cp\u003eFind the software for the E-Ink display on GitHub. It includes simple instructions for updating and customizing the display. Visit the \u003ca href=\"https:\/\/github.com\/zales\/ZlsNasDisplay\" rel=\"nofollow\"\u003eZlsNasDisplay GitHub repository\u003c\/a\u003e for more details.\u003c\/p\u003e\u003cp\u003eDesign by zales1 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67408895738160,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_bbbfab07-44d3-4bb0-89ea-bbc3de80c49d.jpg?v=1785233591","url":"https:\/\/mymadmanlab.com\/products\/zlsnas","provider":"Mymadmanlab.com","version":"1.0","type":"link"}