2.5" SSD to 3.5" SATA Bay Adapter
2.5" SSD to 3.5" SATA Bay Adapter
A hard drive bay adapter: 2.5" SSD to 3.5" SATA HDD. Includes the adapter and the tension arms.
The adapter takes whatever screws come with most SSD mounts (M2?) and should self tap nicely with a bit of back and forth. Can be printed as is.
Print 2 tension arms for each adapter you print. The tension arm is reversible (works for both left and right sides). Print the model as is. Do not print upside down or vertically. Do not include supports as the pins on the arm have supports included in the model. You can easily clip them off.
Remix of this file by 5hwb. The adapter was lengthened to fit a generic tension arm and some supporting material removed from the outer frame.
Remember to LIKE🧡 the model and FOLLOW!
Design by secv808 on MakerWorld (license: BY-SA).