5 Gallon Lid Kit for Hydroponic Tower

Here Is the lid to attach to the Hydroponics tower project which can be found here:

https://makerworld.com/en/models/388717?fbclid=IwAR2sw8Jbv_1jzEUGlOQ0hiO9NDWbZiWWMeckfWbOwmVJ-yP3M9TSuKYlN4A#profileId-289579

This is a repost from https://www.thingiverse.com/thing:4580194

and is free to share according to the license.

Please not the image in the picture is not the best quality bed finish due to bad model contact to the bed. I edited the Z placement to “9” alleviate that issue (hopefully.) Note you will need screws for final assembly. Up to 18 M3 X 6mm screws and respective bolts.

I have plans to print another grow tower kit so will update and edit post when i get a chance with photos.

when using Bambu PETG Basic Combine the file with my custom filament and print profiles for best results from my testing found at

https://makerworld.com/en/models/388542

and

https://makerworld.com/en/models/388537

Design by punkrockbenwilson on MakerWorld (license: BY-SA).