80mm fan adapter for Gigabyte MJ11-EC1 / MJ11-EC0

This is an adapter piece to use 80mm fans on the Gigabyte MJ11-EC1 and MJ11-EC0, instead of the commonly found 60mm server fans, that are quite noisy.

• I've built it in 16mm, 21mm and 26mm height (It's a tube of 10, 15 and 20mm plus 6mm of the two connecting plates).
• I've used 10mm M3 screws and M3 brass inserts to fix the fan to the adapter, but feel free to use whatever you have on hand.
• If you need new screws to fit the fan or adapter to the heat sink, those are M3 8mm
• Remember to buy a PWM fan (4 pin connector) or your motherboard won't adjust the fan speed to the CPU temperature, and it'll run always at 100% speed! 

Design by Andor on MakerWorld (license: BY).