Allmight - My Hero Academia

Project: 1.1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #0056b8 PLA #BambuLab Basic Cobalt Blue  Transmission Distance: 5
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #f4ee2a PLA #BambuLab Basic Yellow  Transmission Distance: 6
    #ff6a13 PLA BambuLab Basic Orange  Transmission Distance: 5.6
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.72mm) swap to #BambuLab Basic Cobalt Blue
    At layer #11 (0.96mm) swap to #BambuLab Matte Caramel
    At layer #13 (1.12mm) swap to BambuLab Basic Red
    At layer #16 (1.36mm) swap to #BambuLab Basic Yellow
    At layer #21 (1.76mm) swap to BambuLab Basic Orange
    At layer #23 (1.92mm) swap to BambuLab Matte Ivory White for the rest.
 

Design by Side Quest Hues on MakerWorld (license: BY-ND).