Black Knight - Based on dummy 13 Fully movable

漆黑骑士（Black Knight），男，游戏《火焰之纹章：苍炎之轨迹》及《火焰之纹章：晓之女神》中的登场人物

漆黑骑士，迪恩王国的四骏之一，身披黑色铠甲的骑士，拥有强大的力量。本名为塞尔吉乌斯，曾经是古雷尔的徒弟。最初在和格雷尔的决斗中杀死了自己的师傅，最终在和艾克的决斗中消失在崩塌的神庙中。
 

在游戏中初见小黑，立刻被其强大的实力和霸气的造型所折服，丫的根本砍不动啊，队伍中没有有效能对其造成伤害的角色。虽然他杀死了自己的师傅，最终和艾克的对决中消失在了遗迹中，有点意难平。却是给我留下了非常深刻的印象。所以我把他通过3D打印做了出来。

制作这模型的过程我也是沉浸其中，建模，打印，测试关节的配合度，组装，再到涂装，制作披风。我十分享受这个过程。上一作重甲骑士一些问题其实用切片软件切一下就好了。。。。（有空修正下之前的作品）又比如没有接触过笔涂，对自己的手法也没什么信心，结果被我找到了水性漆笔。拔开笔帽，即刻涂装，妈妈再也不用担心我涂不好模型了（虽然一些小细节这笔头的大小着实不好胜任）。当我一笔笔勾勒盔甲的裙边，组出了150%大小的黑骑，加上了裙和披风，我记忆中的漆黑骑士，活了！可动的话。。就很一般了，这么大个盔甲，可动受限也合理，游戏中也是各种双手武器单手使的狠人，问题不大0.0

Black Knight, male, a character in the games "Fire Emblem: Trails of Radiance" and "Fire Emblem: Radiance of Dawn"

Black Knight, one of the four horses of the Kingdom of Dean, a knight in black armor, possesses great power. His real name is Sergius, and he was once an apprentice of Gurel. He initially killed his master in a duel with Grell, and eventually disappeared in the collapsed temple in a duel with Ike.

When I first saw Black Knight in the game, I was immediately impressed by his powerful strength and domineering appearance. He couldn't be cut at all, and there was no character in the team that could effectively cause damage to him. Although he killed his master, he eventually disappeared in the ruins in the duel with Ike, which was a bit sad. But it left a very deep impression on me. So I made him through 3D printing.

I was also immersed in the process of making this model, modeling, printing, testing the coordination of joints, assembling, painting, and making cloaks. I enjoyed the process very much. Some of the problems with the previous Heavy Armor Knight can actually be fixed by using a slicing software... (I will correct the previous work when I have time) For example, I had never painted with a pen before, and I had no confidence in my skills. Eventually, I found a water-based paint pen. I uncapped the pen and started painting immediately. My mother no longer had to worry about me not painting the model well (although the size of the pen was not suitable for some small details). When I drew the skirt of the armor stroke by stroke, I assembled a 150% size black knight, added the skirt and cape, and the black knight in my memory came to life! As for the movement... it's just average. For such a large armor, the limited movement is reasonable. In the game, he is also a tough guy who can use various two-handed weapons with one hand, so it's not a big problem.0.0

如有商用请署名｛喵匠Meowcraft｝我本开源，但也请尊重劳动成果

打印前声明：

1. 实话实说，这摆盘我用A1 mini 没有成功打印过一次，很多次在热盘边缘的零件没有粘牢，或者有些部分产生了翘边，或者是A1mini 热床移动过程中的震动导致打印失败，总之就是一人炒面，全家炒面。-------所以我打印的时候一般选择4-6个零件放置于热盘中间进行打印，并且加了大量裙边来提升打印成功率。当然如果有其他更好摆盘或者机器的大佬请自行摆盘。
2. 骨架基于幸运13，但是对比如肩部胯部的转动关键做了拉伸处理以便更好的安装盔甲，与原作不通用，需要注意
3. 我上传了3份打印文件一份是100%尺寸的，一份是150%尺寸的。150%尺寸的成品确实霸气，但是组装需要对骨架进行高比率填充。
4. 裙边的勾线是我用银色水性漆笔涂的，不是一体打印，没那么土豪0.0.裙甲下摆和披风都是另行采购的布料。

5. 不同品牌的petg料的打印效果真的差别很大，当然也可能是我参数调节的问题，同样的参数比如喷嘴温度230-240。T….牌的打印效果就要比J….牌的打印效果好非常多，J牌会出现拉丝和发色不均匀的情况如果有大佬知道为啥请指教

    

   

   5.骨架与外甲对应参考

   

   

Statement before printing:

1：To be honest, I have never successfully printed this plate with A1 mini. Many times, the parts on the edge of the hot plate were not firmly adhered, or some parts had warped edges, or the vibration during the movement of the A1mini hot bed caused the printing to fail. In short, one person fried noodles, the whole family fried noodles. -------So when I print, I usually choose 4-6 parts to place in the middle of the hot plate for printing, and add a lot of skirt edges. Of course, if there are other big guys who have better plate layouts or machines, please arrange the plates yourself.

2：The skeleton is based on Lucky 13, but the rotation keys of the shoulders and hips have been stretched to better fit the armor. It is not compatible with the original, so please note

3：I uploaded 3 print files, one is 100% size, and the other is 150% size. The finished product of 150% size is indeed domineering, but assembly requires a high ratio of filling of the skeleton.

4：I painted the outline of the skirt with a silver water-based paint pen. It is not a one-piece print, not so rich 0.0. The skirt hem and the cloak are all purchased separately.

5：The printing effects of different brands of PETG materials are really different. Of course, it may also be a problem of my parameter adjustment. The same parameters, such as the nozzle temperature 230-240. The printing effect of T... brand is much better than that of J... brand. J…brand will have brushing and uneven color. If anyone knows why, please let me know.

6：Reference for skeleton and armor

Design by 喵匠Meowcraft on MakerWorld (license: BY-SA).