Carvings Raven and the Midnight Moon - 3 Bookmarks

FILES UPDATED 7/28/24 with thicker black backing - Carvings of the Raven and the Midnight Moon - Set of 3 Bookmarks

Please share your prints

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.33x205mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Tough Gray Transmission Distance: 1.8
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Gray
    At layer #10 (0.88mm) swap to Silver
    At layer #14 (1.2mm) swap to Jade White for the rest.
 

Design by mclanesmemories on MakerWorld (license: BY).