Dry Box for IKEA 365+ Food Container

This is a container for turning an IKEA 365+ food container into a dry box with silica gel and an optional temperature/humidity sensor. It doesn't require any modification to the food container and is just put in at the bottom.

The model is printed in two halves, each with two separate silica compartments and a lid. One half contains a slot fo the temperature/humidity sensor. If you don't want the sensor, you can also print the other half twice.

Parts:

• IKEA 365+ food container: Plastic/rectangular, 10.6l, Article Number 792.767.60 https://www.ikea.com/de/en/p/ikea-365-food-container-with-lid-rectangular-plastic-s79276760
• Silica gel
• [Optional] Rectangular temperature/humidity sensor, e.g.: https://www.amazon.de/dp/B08KWCFSXN (I haven't tested it with the listed sensor from Bambu below, but it should be similar)

Design by Matthias on MakerWorld (license: BY).