Boost MeEvery boost will help me in my future work! Thank you very much!
The entire model is printed on parts that are then assembled together. Everything is printed from PLA using a 0.2mm layer and 20% infill.
For a complete holder you will need to print the following parts. You can download a print profile where all the necessary parts are ready for printing.
All components are labeled in the image below. Please read the assembly instructions.
1x Part 1 from black PLA
2x Part 2 from red PLA
2x Part 3 from red PLA
1x Part 4 from red PLA
1x Part 5 from red PLA
1x Part 6 from red PLA
2x Part 7 from black PLA
2x Part 8 from black and yellow PLA
2x Part 9 from yellow PLA
1x Part 10 from brown PLA
1x Part 11 from black and grey PLA
1x Part 12 from grey PLA
1x Part 13 from grey PLA
1x Part 14 from blue PLA
2x Part 15 from grey PLA
2x Part 16 from black PLA
All parts should fit together smoothly. For composition, you can use instant glue for better stability of the structure.
Happy printing.
Design by Vize3Dtisku on MakerWorld (license: CC0).
