Helium balloon weight - 200g - wine bottle

I modeled a balloon weight for a wine themed party.

It weighs about 200g finished and supports 5 to 8 helium balloons.

After the cylindrical part is finished, there is a print break, where you need to add small stones (for example pebble stone 5-15mm) inside the wine bottle.

For easier stone filling use the printer menu to move the print head a side (or move the bed forward one the A1/A1mini).

Never use sand! Your printer fan will blow it all over the place!

A1/A1mini users:

Never print more than one weight at the same time. Your printer will start jumping, after filling the stones in. I learned it the hard way ;)

One balloon weight is near the maximum load your printer bed can handle safely.

A1mini users:

I have not tested the model on this machine, so I am not sure, if it can support the moving weight. Be careful! 

Design by Blubbertzz on MakerWorld (license: BY).