JD FIDGET CUBE

THIS DESIGN IS DEPRECATED: PLEASE USE THE NEW VERSION 2 INSTEAD:

JD Fidget Cube V2 by jakobdam - MakerWorld

--------------------------------------------------------------------------------------------------------------

Summary

Simple fidget cube that can be 100% 3D printed. No extra stuff needed - and the assembly is easy.

Although I haven't tried, scaling should be perfectly viable - just don't make it any smaller as the resistance for the switches will become too fragile. Scaling up should be easy - I chose this size because I have relative small hands.

Print Settings                                         

Rafts:                     

Yes

Supports: 

Yes

Resolution:                     

0.1 (0.2 or 0.4mm nozzle)

Infill: 

25%

                Filament:                                    Polymaker Polyflex PLA                                    Black                    
                        

Notes:                    

This is an easy print; print with the following settings:

0.1mm layer height (for increased precision)
3 walls (just the right amount of sturdy)
15% infill (that's quite enough)
Print with support (in Cura, I usually choose Tree support)
Print on raft (for better bed adhesion for the parts)

On my Monoprice Delta Pro, I can run this print at 80 mm/s and thus get a print time of around 2 hours and 30 minutes for the "ASSEMBLED" file which prints all components at once.

Custom Section

Demo of the JD Fidget Cube v1

Design by jakobdam on MakerWorld (license: BY).