Lab Rax Cable Management for 10inch / 19inch rack

This is a customisable bracket for cable management, it connects from the front to the back of the rack. Holes are available for cable ties,  and  brackets  are available  to pass the larger cables though.

Version 1.2 - added a configurable tolerance to the total depth in the openscad file. (Previously this was hardcoded to 0.5mm). For a well calibrated  H2D 0.5mm is enough, for  non-bambu printers you might want to increase this if you find the length fits a little too tight.

See my other models for more lab rax accessories.

See https://makerworld.com/en/models/1365647-lab-rax-honeycomb-storage-wall-panels-custom#profileId-1411265.  for a hsw honeycomb storage wall compatible  side panel

https://makerworld.com/en/models/1321019-lab-rax-customisable-depth-spacers#profileId-1357193 For customisable depth spacers.

https://makerworld.com/en/models/2668114-lab-rax-construction-brick-side-panel-customisable#profileId-2952758 For Lab Rax toy construction brick side panels

Design by Jeffrey on MakerWorld (license: BY-SA).