Led Ring Lamp with replacement panels

*I would like to thank everyone for every positive comment, rating, and boost of the model. I did not expect such a positive response in such a large quantity. I am very happy and motivated to work on future projects! :)

~UPDATES~

*2024.06.29 - Added new panel - Airplane

*2024.09.06 - Added new panel - Halloween I

*2024.09.07 - Added new panel - Halloween II

WARNING!

• DO NOT print Main Ring with PLA - Use PET-G, ABS or ASA
• Also i recommend to print Led ring with PET-G, ABS or ASA

What you need:

1. DC connector 5.5x2.1

https://pl.aliexpress.com/item/1005006064611551.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.1.2bb8qUapqUapae&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=daf2e5a2-b5bc-442b-b94e-a31251069560&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:daf2e5a2-b5bc-442b-b94e-a31251069560,tpp_buckets:668%232846%238109%231935&pdp_npi=4%40dis%21PLN%214.71%214.91%21%21%211.17%211.22%21%40211b61a417103297213577624e91c2%2112000035569029236%21rec%21PL%213720113438%21&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A

2. Switch ON/OFF

https://pl.aliexpress.com/item/32691250472.html?spm=a2g0o.order_list.order_list_main.5.4f871c24MuxWEf&gatewayAdapt=glo2pol

3. Led stripe 8mm wide

https://pl.aliexpress.com/item/1005006309117824.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.5.79269817zsYsSo&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=d37fc053-854c-4a5c-8e35-af5e8afcbf8c&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:d37fc053-854c-4a5c-8e35-af5e8afcbf8c,tpp_buckets:668%232846%238107%231934&pdp_npi=4%40dis%21PLN%218.87%219.84%21%21%2115.84%2117.58%21%40211b61a417103300687127183e91c2%2112000036706915049%21rec%21PL%213720113438%21&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A

4. Charger 12V

Small instruction:

• Put led strip inside Main Ring, start from bottom hole

• Install electrics parts and connect them together

• Put white ring inside

• Put bottom cover (if you want)

• Insert your favourite panel

DONE! :)

If someone printed this model, give me feedback if you can because this is my first diy model.

Have fun! :)

*I will try add more panels in the future!

CHECK OUT MY OTHER MODELS! :)

1. 

   

   https://makerworld.com/en/models/649862#profileId-576349

2. https://makerworld.com/en/models/559614#profileId-478816
3. https://makerworld.com/en/models/542032#profileId-459602
4. https://makerworld.com/en/models/586849#profileId-508119

Design by Invexpo on MakerWorld (license: CC0).