Linear Filament Swatch Holder V2- Lifts Swatches

Change Log:

V2 = Switch slot width changed from 2.25 to 2.65 to account for swatch variation and print shrinkage. Compatible with the original base and slider.

I wanted to store my filament swatches in a thin compact method that can be stored on top of my printer next to the AMS. Addition of the slider allows the removal of the swatches.

Print settings:

Print used the PLA 0.20mm Standard profile with the only change of Aux fan off.

Can operate the slider one handed but installing rubber feet to the underside is optional.

Recommend to use the slider multiple times to loosen the slots and rotating the swatches can result in smoother operation and prevent any sticking. (V2 print removes the need for this wear in but keep in mind if any are sticking)

Swatch Size:

24mm(H) x24mm(W) x2mm(D)

Slot Size:

21mm(H) x24.6mm(W) x2.65mm(D)

Swatches protrude 3mm above the surface in the lowered position.

Design by Buddz on MakerWorld (license: BY-SA).