Mug cover/Cup lid 实用杯盖

The original cup lid was broken, so I designed one myself, with a size of "cup lid outer diameter 92mm, inner diameter 68mm, height 15mm, thickness 2mm". Please note that it is only applicable to cups with an inner diameter greater than 68mm and an outer diameter less than 88mm (most mugs should be within this range) The preset is horizontal printing.

I have tried changing to vertical printing, and the effect is also good. I suggest you try it too, which can solve the problem of unsightly patterns on the top and bottom layers.

Choose 100% filling and do not leave any space inside, otherwise if hot or cold water is added, it may cause internal air to expand and contract, resulting in damage.

原有杯盖坏了, 于是自己设计了一个, 尺寸是"杯盖外围直径92mm内围直径68mm高15mm厚2mm", 注意只适用于杯口内直径大于68mm, 且杯口外直径小于88mm的杯子(多数马克杯应该在这个范围内). 预设是水平打印.

我有尝试改成垂直打印, 效果也不错, 建议您也以试试, 可以解决顶层与底层之纹路不好看的问题.

填充选100%, 内部不要留有空间, 否则如果装冷热水, 可能造成内部空气热胀冷缩而损坏.

Design by WilburTai大石先生 on MakerWorld (license: BY).