Overwatch HueForge Sombra

HueForge fanart that was adjusted by me. please follow the instruction:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 134x75.38mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.6mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #5 (0.32mm) swap to Marine Blue
At layer #14 (0.68mm) swap to Lilac Purple
At layer #23 (1.04mm) swap to Ice Blue
At layer #28 (1.24mm) swap to Jade White for the rest.

Design by kforris on MakerWorld (license: CC0).