PG scale Zaku bazooka

My PG Zaku II didn't come with a bazooka, so I 3D printed one! All modeled off of the MG scale bazooka, basically a 1-to-1 copy, just scaled up to 1/60th. The only function not present is the cap on the scope; I couldn't figure out how to preserve the feature that allows the cap to hinge open, not to mention I couldn't figure out a way to print out the lens inside anyway. So the scope pretty much has to remain shut. Maybe someone smarter than me can figure that out. Everything else is the same, and looks about identical to the original.

The raw stl files are still at 1/100th scale, so make sure if you use those to scale it up to 167%.
I made this to go with the PG Zaku, so it has a peg to go in the hand like the other weapons the kit comes with. I will say, the tolerances are imperfect--I'd recommend sanding down the peg a bit, as it will be tighter than ideal right out of the gate which may damage the hand. Alternatively, you can print it without the peg, but I don't think the Zaku will have the strength to hold it at all in that case.

I have included a version of the trigger piece without the peg, so if you have other intentions for the bazooka, you're not restricted to a version made specifically for the PG Zaku II. I'm sure it would go nicely with other PG kits, and would most likely scale up or down nicely, though I haven't tried. 

I certainly know I haven't done everything perfectly, so let me know what could be better in the future. I've done a good bit of modeling in the past, but this is my first time posting something so anything I could do differently I would be happy to learn. Thanks!

Design by eagley42 on MakerWorld (license: BY).