Poop Chute - Magnetic mount

If you want to support my work, you can buy me a coffee here :)

https://www.buymeacoffee.com/craycray

When I needed to clear a jam it felt like unneccesary work to remove screws, so I added a magnetic mount instead for easy removal. Everythign else is the same, so all other remixes/attachments/extensions works as well.

It requires 4 pieces of 3x6mm magnets, I used these:

https://www.amazon.se/dp/B07D33PG7Y

I've added a complete set and separate profiles for the mount only, one with the holes added and another one if you want to add holes yourself for other size magnets.

Update 2024-01-06:

Added a custom adapter with fixed angle and wider opening, if you have problem with jams or finding the right angle, use this one instead.

This mount replaces the “mount + first” model, so it's an all-in-one which fits the original extension pieces.

Profile name: Magnetic mount/first chute (Custom adapter) - 0.2mm layer, 2 walls, 10% infill

Update 2024-01-07:

Added print profiles for both the standalone mount and the all-in-one custom adapter, with support for captive magnets.

Update 2024-01-19:

Made a version 2 with a cleaner look and adjusted the angle a bit. Also removed the original “first chute” since it's a bit tricker to get the angles right. Still works with the same extensions. Far from perfect, but i'm learning :)

Design by craycray on MakerWorld (license: BY).