'Poop' toilet roll shelf
'Poop' toilet roll shelf
Summary
As the name suggests, a humourous toilet roll shelf that spells out the word 'POOP'.
The files for the letters P and O are provided.
Print 2x 'P' and as many O's as you want.
I've included 2 versions of the 'P', one has a squared descender and the other has a rounded descender so you can choose which style you prefer.
I printed the 'O's first with a 7% Gyroid infill, but when slicing the 'P's this seemed like too much material, so I lowered that to 3% and it printed fine with 3 walls and 4 top/bottom layers. If I were to do it again, I'd use 3% Gyroid on the 'O's as well.
For those interested in material use per letter (assuming 3% infill etc mentioned above):
Rounded 'P' - 97g - 32.63m
Square 'P' - 100g - 33.51m
'O' - 64g - 21.31m
The dimensions are:
'P' - 116 x 110 x 110mm
'O' - 116 x 58 x 110mm
Wall mounting is achieved by 2 screws for each letter. The screw holes are countersunk and should accommodate most screws.
-Update-
For those with a print bed large enough, I've created a version that is one model rather than the individual letters. You'll need space for 455x110x110mm. Again, there's a rounded and square version.
The design of this project is my own, however the idea was seen elsewhere but I couldn't find a design I was happy with, or able to accommodate on my printer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
3% Gyroid
Filament: Sunlu PLA
Matte White
Notes:
You may want to increase the infill percentage in the area around the mounting screw holes to add some extra strength and prevent the print from being crushed if you over-torque the screws when mounting to the wall.
As it is a bathroom item, I'd advise spray painting/lacquering the prints for ease of cleaning.
Design by avierose on MakerWorld (license: BY-SA).