scary mummy

Project: scarymummy.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 1.3mm

The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA PolyLite Steel Grey Transmission Distance: 1

PLA BambuLab Basic Beige Transmission Distance: 8

PLA PolyLite Pro Cold White Transmission Distance: 0.5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #21 (1.76mm) swap to Steel Grey

At layer #26 (2.16mm) swap to Beige

Border Only Colors from here until the end.

At layer #36 (2.96mm) swap to Cold White for the rest.

Design by JDPmelts on MakerWorld (license: CC0).