Set of various Shelves for Multiboard

Set of six different style Shelves for Multiboard.

This is similar set like I have done for Honeycomb storage wall (HSW) which can be found here . But in this set I have added one extra shelf and redesigned Shelf Nr6 to eliminate any need of supports. So yes, No supports needed here at all. Little assembly needed for Shelf Nr6. My Advise there is to use a Superglue to fix Separate pegs to the Shelf itself. But in most cases it is not necessary. As on all of my Multoboard models I Recommend to use A Weight Bearing Snaps or Tight snaps to fit shelves to Multiboard as my experience of using ordinary snaps shows them are too loose and can fall out any time.

Here are Sizing chart of all shelves presented:

	Shelf Nr1 Width - 103mm Depth - 53mm Height - 30mm
	Shelf Nr2 Width - 103mm Depth - 53mm Height - 30mm
	Shelf Nr3 Width - 103mm Depth - 71mm Height - 30mm
	Shelf Nr4 Width - 120mm Depth - 65mm Height - 9.60mm
	Shelf Nr5 Width - 85.60mm Depth - 46.60mm Height - 16.80mm
	Shelf Nr6 Width - 120mm Depth - 61mm Height - 10mm

That's ALL. Enjoy.

You can Buy me a coffee if You want to support me even more in my work here :)

https://www.buymeacoffee.com/warlogh

(And very Big Thank You For interest in my work)

Design by warlogh on MakerWorld (license: BY).