Sheep toilet paper roll holder

The eye-catcher for the quiet room.

Dimensions: width 50 cm, height (without rolls) 27 cm, depth 11.5 cm

The wall bracket holds up to 13 rolls.

It can be drilled or attached with double-sided adhesive tape.

The lamb's head is held in place with 6x3 magnets and can be easily removed for filling.

Designed for standard rolls with a diameter of 12 cm and a length of 10 cm

Caution:
The complete print bed is used!
When printing the head, the calibration strip/prim must be removed.
Therefore, a pause is set.

The base is unfolded after printing and fixed with the clamps.

You need 8 6x3mm round Magnets.

Have fun printing ;-)

Design by Lp3d on MakerWorld (license: BY).