Small container ship 1:400

Realistic small container ship model in scale 1:400.
The hull length of the model is 28 cm and can be printed in one single piece.

All parts must be printed as oriented on the build plates.
Before printing the hull, it is recommended to perform a support test and adjust the Top Z Distance to achieve the best result.

Most parts fit together without issues, but the railings and deck hatches must be glued onto the main deck.

All containers can be found in my previous upload

How to print

Plate 1:
Standard layer height (0.20 mm) with normal supports.
Color: same as the upper part of the hull.

Plate 2:
Standard layer height (0.20 mm) with normal supports.

Plate 3:
Standard layer height (0.20 mm) with organic supports.
Color: the first 1.8 mm must be the same color as the upper part of the hull.

Plate 4:
Standard layer height (0.20 mm), without supports.

Plate 5:
Extra fine layer height (0.08 mm), without supports.

Plate 6:
Extra fine layer height (0.08 mm) with normal supports.

Plates 5 and 6 can be difficult to print.
If the print fails, try adjusting the print settings.

Design by Lauridsen on MakerWorld (license: BY).