Speaker box for 80mm speaker

Speaker box for a 80mm (diameter) speaker.

How to built it:

• Use 10x M3 plastic inserts for the covers
• Use 4x M4 plastic inserts for the speaker

These inserts need to be melted into plastic after printing the case.

Inside the case is a small hole, for the cables of the speaker. The hole goes out of the back and can be closed from the inside with a small amount of hot glue.

The distance from the M4 speaker screws are the following: 64.5mm

The result is very good.

Happy printing

Design by FRP233 on MakerWorld (license: CC0).