Vinyl Record Holder

The record holders are designed around the small Command Poster Strips (https://www.amazon.com/Command-Hanging-Hangers-Posters-Adhesive/dp/B0751VFF2X/ref=sr_1_8?sr=8-8) or smaller nails.

If you're using the Command Strip version, please be sure to follow the instructions on the Command Strips, like what surfaces work and to clean the wall before mounting anything.

I've also added Spacers you can print out to help with mounting multiple Vinyl Record Holders. So you can easily get consistent distances between each and every record. These are not required, but greatly helps!(no need to measure and mark the wall!)
There's currently only a 4cm Horizontal Spacer, and a 7cm Vertical Spacer. These are what I found to be ideal for me. but again, new sizes can easily be added, just ask if you find you need bigger/smaller spacers. 
I wouldn't recommend going smaller than 7cm for the Vertical Spacer though, as you need that space to easily pull the record out without it getting caught in the Vinyl Record Holder above.

When printing, I strongly suggest printing the Vinyl Record Holder as solid as you can, with support. I've only printed them in PLA and have had no trouble with their strength.

As usual, I've put this all under public domain, do what you want with these designs. have fun!

Design by KabisCube on MakerWorld (license: CC0).