重装板甲骑士-Heavy Plate Knight-2.0

对之前的重装板甲骑士的模型做了全面的调整，使得打印更加方便。

之前一作是刚接触3D打印的第一作，当时连切片软件中的切割命令和负零件命令都不会，所以都是在3Dmax软件中强行调整平面，所以导致打印效果不行。也是承蒙各位同好的喜爱，收获了不错的下载量，非常感谢各位以及dummy 13 的原作者所提供的优秀的骨架。我对前作做了全面的调整，希望各位喜欢。

The previous model of the heavy plate armor knight has been fully adjusted to make printing more convenient.

The previous work was my first work when I was new to 3D printing. At that time, I didn’t even know the cutting command and negative part command in the slicing software, so I had to force the plane to be adjusted in the 3Dmax software, which resulted in poor printing results. Thanks to all of you for your love, I have received a good number of downloads. Thank you very much to everyone and the original author of dummy 13 for providing the excellent skeleton. I have made comprehensive adjustments to the previous work, and I hope you like it.

修改内容：

1：头盔部分调整了打印平面，沿用了dummy13 的头部卡扣

2：肩甲和肩膀部分卡扣向内收，减少穿帮，增加了可动

3：做了新标肩甲，表现一种龙鳞的效果，（如果觉得密恐还是用原来肩甲即可0.0）

4：大臂肘部盔甲做了拉伸，对肘关节做了一定遮盖，改善了之前肘关节空洞穿帮的情况

5：腰部侧裙甲的卡扣进行了加固

6：侧裙甲也做出了龙鳞效果（如果觉得密恐还是用原来侧裙甲即可0.0）

7：前后裙甲做了可动关节，不再会干涉腿部的活动，可以做出更多的pose，你甚至可以把他当做笔架

8：胯部的卡扣进行了重新设计安装更加牢固，但是想保持更好的强度建议上胶水

9：膝盖甲的凹槽重新设计了，减少了干涉，同时更加容易安装，但是想保持更好的强度建议上胶水

10：增加了万圣的南瓜头部

11：武器部分调整了打印平面，容易打印

12：添加了新款带盔甲的手部

注意：为了比例以及安装的考量，对一部分骨架做了比例长度上的调整，所以骨架与原作dummy 13不通用

裙边和身体主体的大部分的支撑实际可以去除，我是为了打印的成功率所以加了很多裙边和支持，各位自行调整

Modifications:

1: The printing plane of the helmet part was adjusted, and dummy13 was used. Head buckle

2: Shoulder armor and shoulder buckle are retracted inward to reduce the gap and increase the mobility

3: New shoulder armor is made to show a dragon scale effect (if you feel that you are afraid of dense, you can still use the original shoulder armor 0.0)

4: The upper arm elbow armor is stretched to cover the elbow joint to improve the hollow elbow joint gap

5: The buckle of the waist side skirt armor is reinforced

6: The side skirt armor also has a dragon scale effect (if you feel that you are afraid of dense, you can still use the original side skirt armor 0.0)

7: The front and rear skirt armors have movable joints, which will no longer interfere with the movement of the legs and can make more poses.You can even use it as a pen holder

8: The buckle of the hips has been redesigned to make the installation more secure, but if you want to maintain better strength, it is recommended to glue

9: The groove of the knee armor has been redesigned to reduce interference and make it easier to install, but if you want to maintain better strength, it is recommended to glue

10: Added Halloween pumpkin head

11: The printing plane of the weapon part has been adjusted for easy printing

12: Added new armored hands

Note: For the sake of proportion and installation, some of the skeletons have been adjusted in length, so the skeleton is not compatible with the original dummy 13.

The skirt and most of the support of the body can actually be removed. I added a lot of skirts and supports for the success rate of printing. Please adjust them by yourself

Design by 喵匠Meowcraft on MakerWorld (license: BY).