6 Inch Swimbait (TPU Tail)

Description

Easy to build swimbait 6 inch

Parts List:

-Treble hooks size 1/0 black nickel

-0.88mm wire https://www.amazon.com/dp/B000BPEQAE

-Screw Eyelets size 5*12mm

Assembly:

-Print all parts with 0% infill

-Pause print on top holes and put in weight ( I recommend using cut lead weights unlike the image)

- Screw in and add glue to all eyelets

-If you want to paint do before next step.

-Get your 0.8mm wire and put into the bottom holes ( You may have to grab pliers and kind of force it in even if the holes are a bit blocked by plastic just push hard enough and it will go in)

-After connecting the 3 parts with the wire make sure they are in good and cut the eccess and add a drop of glue.

Design by 3dPrintables on MakerWorld (license: BY-SA).