Argon Neo 5 M.2 NVMe Case mount for the Rasp Pi 5

This mount is specifically for the Argon Neo 5 M.2 NVMe as pictured above in its instruction manual. There are quite a few Argon Neo cases made for the pi 4 and 5. This one is for the Pi 5 with a NVMe bottom hat built in. The mount has 3mm mounting holes and slots for M3 bolts or it can be mounted with zip ties as seen in the pictures of it mounted on the back of a monitor. The Profile has manually drawn in slim tree supports to minimise the amount of support used and to ease the removal after printing. The second profile is for over-clocked or a Pi that just runs hotter. It has cut outs front and rear the expose more aluminium to hasten cooling. Both print profiles have been tested in PLA, PETG and most importantly ABS. ABS handles the heat better and was tested to ensure the extra shrinkage with ABS didn't cause fitment issues. This may be a niche model but the Argon Neo line of Pi cases are some of the best for the Raspberry Pi 5 and would be a great addition to your Raspberry Pi lab.

Design by ShayneTroxler on MakerWorld (license: BY-SA).