Articulated Spider
Articulated Spider
| Important notice: I have restored this page because this design is under a Creative Commons license and deserves to be shared - and attributed properly. However, please understand that I do not regularly check comments or messages on MakerWorld. I encourage you to find me on Printables or visit lucky13toys.com. |
This is my own work, originally uploaded to Printables.
This spooky spider is fully articulated and can even dangle from a web of filament! Great for Halloween decorations, party favors, or just to play with at your desk.
Instructions
The included 3MF file has all the parts you will need, or you can print individual parts with the quantities called out in the file names. Print the eyes separately if you'd like them to be a different color (no MMU/AMS needed).
💡 TIP: Start by printing just one set of leg parts for a test fit. If the joints are too tight or too loose, you can adjust the fit with the “XY size compensation” setting in PrusaSlicer (or the equivalent in your slicer of choice).
💡 TIP: The eyes into the carapace may be a tight fit. If needed, you can reprint the eyes with an X-Y contour compensation of -0.1mm for a looser fit.
Recommended print settings
| Material |
PETG, ABS, or ASA for best results PLA is okay but may be tougher to assemble and will get floppy over time. |
| Layer height | 0.15 mm |
| Infill | 10-20% rectilinear |
| First layer speed | 25% of default |
| Supports | None |
| Brim | None (may be needed in case of poor bed adhesion) |
| Additional settings | ✅ Print external perimeters first |
Once the parts are printed, assemble them as shown below. All parts should snap-fit into place, no glue needed.
💡 TIP: The moving joints need to be “broken in” to smooth out imperfections in the print. Just move them back and forth a few times as you assemble them.
And just like that, your articulated spider is complete! Have fun posing and displaying it however you like. You can even insert some 1.75mm filament into the abdomen to have your spider dangling from a web! (How's that for “silk” PLA?)
This design is now under a CC BY 4.0 license. This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:
| Articulated Spider © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 |
Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product.
Want to support future projects with a one-time donation? Make a PayPal donation here!
Design by Lucky 13 Toys on MakerWorld (license: BY).