AVP Requirem Poster

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.03x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.76mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #002a96 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 1.2
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Cobalt Blue
    At layer #9 (0.8mm) swap to Cyan
    At layer #11 (0.96mm) swap to Jade White
    At layer #16 (1.36mm) swap to Black
    At layer #17 (1.44mm) swap to Red for the rest.
 

Design by ogre56 on MakerWorld (license: BY).